Motor Protection Electronics, Inc. - Station Controller SC100

Call Us:  407-299-3825 • Email Us: info@mpelectronics.com

HomeAbout UsNews/EventsWhite PapersDistributorsMembership AffiliationsMPE Controllers to SCADAWarrantyRepresentativesMonthly SpecialContact Us
     

Our Products

Phase Monitors
Voltage Monitors
Duplex Alternators
Triplex / Quad Alternators
Time Delay Relay
Intrinsically Safe Controls
Controllers
Level Measurement
Special Controls
Hardware
 Search Catalog
      GO   
 All Categories    Station Controller SC100
If you don't find what you are looking for, please call MPE at 407-299-3825.
All Categories > Controllers > Station Controller SC100 > View Items 

Station Controller SC100

 width=
Check up to five results to perform an action. width=


The SC100 controller is a low cost, simple to use duplex controller with an analog input for level control. The controller contains four output relays; for pump 1 and pump 2 call, and for high and low alarms. A regulated 24 V DC power supply is provided for powering the pressure transducer circuit. The controller contains a red LED bar graph to display the level, and red LED’s to display Pumps 1 and 2 call, and the high and low level alarms. There are additional red LED’s for the level settings and level simulation, which are turned on by depressing the Setting Select pushbutton. The controller also has a 10 second power-up delay, and a 5 second lag pump delay to prevent the turning on of one or both of the pumps immediately after a power interruption.

Downloads - Product Data Sheet, Product Specification Sheet and Product Manual

Product Image - Station Controller SC100

larger image 		Dimensional Drawing

larger image



    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Request InformationCompare Items   Results per Page : 
  Results 1 - 3 of 3 1 

Item #

Item Name

Scale Range (per ft. of H2O)

Operating Voltage (AC)

Max. Input Power

Power for Analog Input

Relay Output

SC100-05 Station Controller 0 to 11 ft. 120 V 7.8 VA 24 VDC 10 A
SC100-10 Station Controller 0 to 22 ft. 120 V 7.8 VA 24 VDC 10 A
SC100-15 Station Controller 0 to 33 ft. 120 V 7.8 VA 24 VDC 10 A
  Results 1 - 3 of 3 1 
         
Motor Protection Electronics, Inc. - 2464 Vulcan Rd. - Apopka, FL 32703 - Tel: 407-299-3825 - Fax: 407-294-9435 Email: info@mpelectronics.com