Motor Protection Electronics, Inc. - Alternators

Call Us:  407-299-3825 • Email Us: info@mpelectronics.com

HomeAbout UsNews/EventsWhite PapersDistributorsMembership AffiliationsMPE Controllers to SCADAWarrantyRepresentativesMonthly SpecialContact Us
     

Our Products

Phase Monitors
Voltage Monitors
Duplex Alternators
Triplex / Quad Alternators
Time Delay Relay
Intrinsically Safe Controls
Controllers
Level Measurement
Special Controls
Hardware
 Search Catalog
      GO   
 All Categories    Alternators
If you don't find what you are looking for, please call MPE at 407-299-3825.
All Categories > Duplex Alternators > Alternators > View Items 

Alternators
Check up to five results to perform an action.

Product Image - Alternators 008-XXX-12

larger image 		MPE duplex alternators are designed to perform automatic alternation motors or other types of loads, and are available in 24V, 120V, and 220V models. Alternation causes the loads to have even run times. The output relay contacts change state each time the control switch is opened. Two options are available: (1) a lead/lag/automatic selectror switch and (2) a push-to-test switch for added convenience or trouble shooting.




    Print Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Request InformationCompare Items   Results per Page : 
  Results 1 - 25 of 36 1 2 

Item #

Options

Operating Voltage (AC)

Base Configuration / Relay Type

Case Size

008-024-10 Std Unit 24 V 8 Pin, SPDT Tall
008-024-10S Lead / Lag Select 24 V 8 Pin, SPDT Tall
008-024-10SP Lead / Lag Select
Push-To-Test 		24 V 8 Pin, SPDT Tall
008-024-11 Std Unit 24 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-024-11S Lead / Lag Select 24 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-024-11SP Lead / Lag Select
Push-To-Test 		24 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-024-12 Std Unit 24 V 11 Pin, DPDT Tall
008-024-12S Lead / Lag Select 24 V 11 Pin, DPDT Tall
008-024-12SP Lead / Lag Select
Push-To-Test 		24 V 11 Pin, DPDT Tall
008-024-13 Std Unit 24 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-024-13S Lead / Lag Select 24 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-024-13SP Lead / Lag Select
Push-To-Test 		24 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Tall
008-120-10 Std Unit 120 V 8 Pin, SPDT Short
008-120-10S Lead / Lag Select 120 V 8 Pin, SPDT Short
008-120-10SP Lead / Lag Select
Push-To-Test 		120 V 8 Pin, SPDT Short
008-120-11 Std Unit 120 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Short
008-120-11S Lead / Lag Select 120 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Short
008-120-11SP Lead / Lag Select
Push-To-Test 		120 V (Power on Pins 3 & 6 ) 8 Pin, DPDT Cross Wired Short
008-120-12 Std Unit 120 V 11 Pin, DPDT Short
008-120-12S Lead / Lag Select 120 V 11 Pin, DPDT Short
008-120-12SP Lead / Lag Select
Push-To-Test 		120 V 11 Pin, DPDT Short
008-120-13 Std Unit 120 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Short
008-120-13S Lead / Lag Select 120 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Short
008-120-13SP Lead / Lag Select
Push-To-Test 		120 V (Power on Pins 5 & 6 ) 8 Pin, DPDT Cross Wired Short
008-220-10 Std Unit 220 V 8 Pin, SPDT Tall
  Results 1 - 25 of 36 1 2 
         
Motor Protection Electronics, Inc. - 2464 Vulcan Rd. - Apopka, FL 32703 - Tel: 407-299-3825 - Fax: 407-294-9435 Email: info@mpelectronics.com